Best Serpentine Belt Tool – Reviews and Buyer’s Guide

This article may contain affiliate links. For details, visit our Affiliate Disclosure page.

Are you on the marketplace searching for the Best Serpentine Belt Tool to adjust your vehicle’s engine?

The serpentine belt tool kit makes it significantly simpler to place the non-working pulleys adjust belts to the ideal tension. When the idle pulleys are fit to perfection, you won’t have to worry about your engine not working correctly. After all, perfectly working pulleys are essential to keep it all in a better flow.

However, the marketplace is flooded with loads of serpentine belt tools, and it’s complex to differentiate which one to buy and which one to avoid. Therefore, our list of the Best Serpentine Belt Tool will make it easier for you. Take help from our buying guide to learn everything about your potential serpentine belt tool kit!

Table could not be displayed.

Why Do You Need a Serpentine Belt Tool?

Firstly, a brief history of the serpentine belt. This appropriately called band of support site rubber is an essential element of the functioning engine that powers any component that isn’t instantly driven by the vehicle’s engine.

Typically, this comprises a water pump, emissions control systems, power steering, and an alternator, among other things. As you might guess, when this belt cracks or slides off its pulley, everything may swiftly spin out of control – yet it does occur.

The difficulty is that changing this basic belt may be a time-consuming task for every experienced technician, let alone a novice. The belt meanders over several rollers connected to the peripherals it drives, and those shafts are generally spaced far off in tight places near the front of the engine compartment.
Many automobiles include a tension system that you may release the belts by adjusting with a tool. When professionals do it properly, they may have to eliminate multiple parts such as the tire well or engine cowl to obtain sufficient elbow space to release the tensioner.

Top 10: Best Serpentine Belt Tool

1. Performance Tool Serpentine Belt Tool Set

If you’re looking for the complete serpentine belt toolset, the Performance Tool Serpentine Belt Tool Batch sets the standard with its high-quality load management, as it attempts to pack a lot of punch.

The toolset comes in 13mm, 14mm, and 15mm crowfoot wrenches were also provided. Finally, the performance tool serpentine belt toolset is our best pick that satisfies every user.

The serpentine belt toolset is utilized for a variety of purposes by most clients. They also believe that the serpentine belt tool kit that arrives with that does the job.
This item met the requirements, with many happy customers ready to tell others about their positive experiences.

2. Powerbuilt Alltrade 52

The Powerbuilt Serpentine Belt Tool Set is just that: a straightforward belt toolset that strikes all of the keystrokes. The serpentine belt toolset from Powerbuilt is intended to dismantle and upgrade serpentine belts on cars with spring-filled belt tensioners.

That’s where the serpentine belt tool kit comes in handy. It’s also highly durable and trustworthy, with the potential that it can last a generation.
The power-built tool kit, most significantly, contains components for particular car systems, such as GM, Volvo, VW, Saab, Ford, etc.

According to most customers, the serpentine belt tool set should be a must-have package for ordinary technicians. Furthermore, they both believe that the serpentine belt toolset is made for such tight spots…
Several people have also discovered that the serpentine belt tool kit comes in a bubble pack. And, while the set is a little more expensive than some others, it is worth a try. To summarise, they feel they got a great bargain on it for the cost.

3. OEM Tools 25149 Serpentine Belt Tool

The OEM tools Serpentine Belt Tool arrives in a design to operate on a range of cars with this fresh auxiliary belt tensioner. It offers the necessary tension and room for the springing tension to be released and the tensioning pulleys to be removed.

It comes with a large grip, four deep 13, 15, 16, and 18 mm connections, and a half-inch driving “adapter for the drive. The grip seems to have a 3/8” diameter. For applications that require more strength, use a square drive.

4. OTC 7654A Serpentine Belt Installation Tool

The OTC 7654A features a three-pin structure that supports timing belts, V-belts, and serpentine while also providing additional adjustability for stretching operations.

Ergonomic design allows technicians to rotate belts in restricted, difficult-to-reach locations. 25″ in length Throughout serpentine belt replacement, this formidable tool gives you more control and range.

5. Gearwrench Serpentine Belt Tool

Gearwrench Serpentine Belt Tool Set is the ideal pick if you’re searching for a simple serpentine belt power tool for everyday use. Input your serial number to ensure the item matches. The serpentine belt tool kit also comes with a 15-piece toolset and is manufactured and supplied by Atright.

According to our assessment, the equipment is pricey, but it makes up for the missing components of a fantastic tool.
A robust serpentine belt rod is combined with a ratcheting wrench that may be added to the end of a set. It may be set appear in a lot of strategies to satisfy odd inclinations. The crow’s feet connectors are pretty helpful and available in a variety of sizes.

6. EWK Mini Cooper Serpentine Tool Belt Tensioner

The EWK serpentine belt tool is only suitable with Mini Cooper S W11 R52 R53 engines. The redesigned 26-inch large rod gives you ample strength to tighten and unwind the belt in seconds.

It includes all the tools you’ll have to position and secure the tensioner slots and maximum tension. A serpentine belt tensioner tool and a securing clip are included.

Spare yourself the trouble of wriggling underneath the automobile! An R53 belt puller is a must-have tool for replacing the engine belt on your own without bruising your fingers.

7. ATD Tools Tru-Grip Serpentine Belt Tool

The ATD Tru-Grip Serpentine Belt Tool is one heck of a tool for doing the hard work. It arrives with a clamping jaw that enables the technicians to place the belt without worrying about its slipperiness.

The Tru-Grip’s extended range is allowing anyone accesses to tight areas of the engine. Further, it is highly durable thanks to its sheer strength and alloy steel material. In addition to that, the ergonomic handle offers ease and comfort, acting as an extension for the user’s hand.

8. CTA Tools Mini Cooper Serpentine Belt Tool Set

The CTA Tools Mini Cooper Serpentine Belt Tool arrives in a complete set wrapped in bubbled paper. Bear in mind these are two-set long handles of 22-inch each that wrenches to service the old version Mini Cooper.

The serpentine belt tool has offset working ends large and small 12 point wrenches. And if you’re worried about durability and comfortability of handle, well, worry not. The black finish with a vinyl grip makes it durable and allows you to access tight spaces.

9. Fairmount Tools Ratcheting Serpentine Belt Wrench Tool Kit

The Fairmount Tools presented us with this excellent Ratcheting Serpentine Belt Wrench Tool Kit that makes it a cakewalk removing and installing serpentine belts. The 23-inch extended slender design not only prevents damage, but also allows maximum reach in tight spaces.

You can comfortably remove the tension On a spring-loaded idler. Look out for the chrome vanadium sockets in 13,15,16 and 18mm. This one offers excellent value for money.

10. Lisle 59000 Ratcheting Serpentine Belt Tool

Last, but not least, the Lisle 59000 Ratcheting Serpentine Belt Tool arrives with a ratcheting head combined with a freewheel placement that makes for maximum leverage. The extension ensures accessibility to tight areas inside the pulley.

For Toyota and Honda users, there is a 19mm socket available. Due to lack of accessibility when traditional breaker bars or ratchets would not work.
Adjust the ratcheting gear to the center or balanced point, then snap the handle into action to secure the ratcheting action after the required travel point has been achieved.

Buyer’s Guide – What to Look for While Buying the Best Serpentine Belt Tool

Before you buy your ideal serpentine belt tool kit, you should be able to differentiate between a top-quality serpentine belt tool and an ordinary one. The following key features will help you in your search big time:

• Size
Your original serpentine belt’s tool brand name will also assist you in choosing the optimum replacement size. Remove the old belt tool and measure the length to replace it if it is too damaged to display any model number.
Next, to achieve the most excellent fit, choose an alternative component that is one size smaller. Instead, if you still have it, your automobile owner’s handbook will tell you what size serpentine belt and tool you need.

• Material
The typical fabric for serpentine belt tools was once Neoprene. However, the belt tools often turned out to be glossy and cracked over time.
Most companies have switched to EPDM (Ethylene-Propylene-Diene-Monomer) and Vinyl, which is more resistant to corrosion and heating than Neoprene and lasts much longer.

You would like it to be constructed of solid metal in any scenario. This is specifically important for the first kind of serpentine belt tool subjected to a great deal of pressing and tugging.

A variety of plug types is a significant benefit, particularly if you’d like to operate more on your car. Don’t forget about the grip: Once you’re pressing into a too-tight pulley, a non-slip rubberized grip may make a world of difference.

• Durability/Range

The serpentine belt’s structure must be robust enough to endure the warmth and harsh conditions that lead to deterioration. The belt tool must be 14-15 mm in size on average.

You can seek your perfect size, but replacing your belt will be easier if you stick to the size range given above.

• Shear Resistance

This refers to the belt tool’s capacity to defend itself or withstand stress concentrations like shearing or fracturing. Many high-end belt tools are touted as crack-resistant due to the belt tool’s material selection and design.

Are There Different Types of Serpentine Belt Tools?

Using a serpentine belt tool is a simple solution. Please remember that there will be two sorts of serpentine belt toolkits: one is for reaching to and tightening that nagging tensioner, another for grabbing and placing the belt.

The first kind of serpentine belt tool is a broad, narrow rod with a driving square with one end in the most primitive sense. You’ll have a wrench that would extend down into difficult places beneath the hood when you’ve fitted the proper attachment.

It allows you to change the tensioner without needing to disassemble half of your automobile, which may buy you a great deal of time and resources.
Such types of equipment are sometimes sold in sets that also include a variety of popular connections and one or more extending rods.
The tensioner in certain automobiles isn’t only in a cramped location; it’s also in an uncomfortable one. Expansion rods can be added to the top of a serpentine belt tool to provide traction at various angles. In many situations, a conventional wrench may be attached to the tool’s tip.

The second type of serpentine belt tool is often utilized to move the belt rather than release the pulleys. Serpentine belts can wrap over several pulleys in places that are much harder to reach than the tensioner.

An assembly tool for serpentine belts is a lengthy pole with a three or four spike at the tip. The tuning pegs of these forks are tailored to accommodate the holes in the belts and are positioned at a perfect distance to the bar area. This enables it a lot simpler to grip and extend across pulleys without really needing to touch them.

Serpentine Belt Tools – Tips and Advice

It’s generally straightforward to understand when your serpentine belt requires substituted in the first place. Small testers may also test the appropriate degree of wear in your tracks should you genuinely need to perform your own diagnostic.

And while you’re taking a look for friction, inspect your tensioner arm initially by offering it a glance whereas the car is operating.
Although the tensioner may vibrate somewhat, a properly functioning tensioner must operate without swaying in the belt. When the tensioner elbow is sliding sideward by 1/4 inch more, it should be changed even before the new serpentine belt is worn out.

Final Thoughts

Well, there you have it. All about the Best Serpentine Belt Tool that you wanted to know: we would also like to inform you that while all of the products reviewed offer actual value for money, the Performance Tool Serpentine Belt Tool Kit provides even more than that. It’s undoubtedly capable of managing high-quality load work to accommodate all your needs.